|
The ProVisionä
inspection stations provide advanced capabilities for inspecting both
repetitive or single-piece patterns on flat product stock. Systems with
advanced high sensitivity TDI line scan cameras or 2D area-scan cameras
are available. High speed, high accuracy XY motion stages transport the
part under the camera(s). The stage motion is integrated with the image
capture to ensure the optimum combination of inspection accuracy and
speed. Whether your application involves printed wiring boards, flexible
printed circuits, arrays of circuits screen printed on sheets, or any
similar application, a ProVision system can be configured to meet your
requirements.
 |
ProVision |
| Integrated optical
inspection tool for high volume production |
| Built-in measurement
functions with Pass/Fail decision-making and statistical reporting |
| High speed, high
resolution and high accuracy |
| Ideal for inspection of
flat stock, e.g. flat panels or sheets of material |
| Built-in automated
calibration to self-maintain measurement integrity |
| Horizontal or
semi-vertical load/unload |
| Slip sheet and panel
flipper options |
| |
 ProVision data
sheet
As reported in Matrox Imaging Insight, Volume 9 No. 1.
Imaging Insight extract.
If your processes don't allow you to build quality into your product, then
inspection provides the mechanism to avoid bad product leaving the plant
as well as the statistical information to enable process control.
Statistical and yield reporting may also be required by regulatory
authorities in your industry.
Specifications*
|
System Hardware |
|
· Single camera or
multiple-camera configurations, depending on part layout |
|
· Advanced TDI
line-scan cameras offer the highest sensitivity |
|
· Single product or multiple-up configurations |
|
· Precision linear
motor XY
stages with high resolution encoder feedback
|
|
· Calibration targets
for scaling compensation |
|
· Vacuum platen for
panel hold-down |
|
· Variety of
illumination configurations: colinear, ring, oblique; with
different wavelengths available |
|
· Compliant with CE and
North American regulations |
|
· Maximum panel size
533mm x 635mm (21" x 25") |
|
·
Large process viewing window |
|
· Ultra-stable steel weldment frame with resonance dampening |
|
|
|
· Optional sheet barcode reader |
|
· Optional sheet barcode marker |
|
· Optional automatic panel loader/unloader |
|
|
|
|
|
Utilities
|
|
· Electrical: 208 VAC, three phase, 5-wire "WYE",
25A, 60Hz; or 400 VAC, three phase, 5-wire "WYE", 15A,
50Hz. |
|
· Weight: 2813 kg (6233
lbs) net;
3437 kg (7563 lbs)
shipping |
|
· Dimensions (HxWxD):
93"x64"x86"
2356mm x 1626mm x
2192mm |
|
|
|
|
| |
|
|
|
System Control |
|
· Windows XP® based user interface
|
|
· User friendly
touchscreen operator interface |
|
· Straightforward
training of new part pattern(s) |
|
· Saving of multiple
job parameter files |
|
· System monitoring for
process integrity |
|
· Full system diagnostics |
|
· Emergency stop and
safety interlock circuits |
|
· Password protection for access to
configuration, set-up, and operating screens |
|
|
|
· Optional network interface |
|
|
|
Process Parameters |
|
· Edge detection, area
calculation, linear distance measurements and shorts detection |
|
· Many measurements
possible from a single capture |
|
· Pass/Fail decisions
and statistical output of measurement data |
|
· Compatible with a single large pattern or repeating smaller
patterns |
|
· Resolution better than 5 µm |
|
· Area accuracy measurement better than 0.5% |
|
· User-settable regions of interest with the capture field |
|
|
|
|
|
|
|
|
|
|
|
|
| * specifications are subject to
revision and change |
|
▲[top] |
|
|
|
